| Availability: | |
|---|---|
| Quantity: | |
▶ Product Introduction
The double-lamp arms of the LED street lamps are symmetrically arranged. The light coverage is wide and the brightness is stable. The uniformity of road illumination reaches above 0.7. The light has high color rendering ability, which can clearly reproduce the road conditions, enhance the visibility of pedestrians and vehicles at night, and ensure the safety of road traffic.
▶Product Advantage
1. High initial investment cost-effectiveness: The unit price is 30% lower than that of similar imported products, while maintaining the same light efficiency and lifespan. It also offers a 3-year free warranty, reducing the initial cost pressure for municipal LED street lamp purchases.
2. Low long-term operation and maintenance costs: The light source has a lifespan of 50,000 hours, equivalent to 6 years without replacement; the lamp body's anti-corrosion coating has a lifespan of 10 years, reducing renovation costs. The long-term usage cost is 55% lower than that of traditional street lamps.
3. Reduces line loss: The low-voltage drive design results in a line loss rate of ≤ 2%. Compared to high-pressure sodium lamps (with a loss rate of 8%), it saves a significant amount of line power consumption costs annually, optimizing the overall expenditure of the lighting system.
4. Advantage of residual value recovery: The aluminum alloy material of the lamp body can be 100% recycled. After报废, the residual value is approximately 15% of the initial cost, which is higher than that of traditional street lamps (residual value 5%), enhancing the long-term value of assets.
▶Product Uses
1. Pilot sections for smart transportation: The two lamp arms are reserved with interfaces for traffic monitoring and radar speed measurement equipment. After connecting to the smart platform, they can adjust the lighting intensity in accordance with the road conditions, automatically increasing the illumination level during periods of heavy traffic flow.
2. Sections for new energy infrastructure: The lamp poles integrate charging module, with the two lamp arms responsible for road lighting. This is suitable for urban dedicated lanes for new energy vehicles and surrounding areas of charging stations in the suburbs, achieving integrated services of "lighting + charging".
3. Surroundings of emergency shelters: The two lamp arms have emergency power supply functions. In case of power failure, they can automatically switch to the backup power supply, maintaining illumination for 4-6 hours, suitable for emergency shelters such as school playgrounds and municipal squares.
4. Data monitoring sections: Equipped with environmental sensors, while the two lamp arms are providing lighting, they can simultaneously collect PM2.5, temperature and humidity data, and upload it to the city environmental monitoring platform, assisting in smart environmental management.
▶Product Operate Guide
1. Fix the lamp pole: Vertically fix the lamp pole on the pre-prepared foundation, and tighten the anchor bolts;
2. Install the lamp arms: Fix the double-arm lamp head on the top flange of the lamp pole, adjust the angle and lock it;
3. Connect and debug: Connect the power cord, check the circuit, power on and test the lighting effect and angle, and confirm there are no errors before completing the installation.
4. Acceptance inspection: Confirm that the lamp pole is stable and the lamp is emitting normally, and complete the installation.









Subscribe to our newsletter
