▶ Product Introduction
The single-arm LED street lamp is powered by mains electricity. The LED light source consumes only one-third of the energy of traditional street lamps, significantly reducing electricity expenses. It has a lifespan of over 50,000 hours, reducing the frequency of replacement and maintenance costs. The single-suspension design also optimizes installation efficiency and is suitable for various municipal lighting renovation needs.
▶Product Advantage
1. Efficient Optical System: Equipped with customized LED bulbs, with a luminous efficiency of 140lm/W. Combined with professional secondary optical design, the uniformity of light coverage exceeds 0.75. It can illuminate a road width of 12-20 meters, meeting the high standards of urban main road lighting.
2. Stable Power Supply Adaptation: Built-in wide-voltage power supply (AC85-265V), adaptable to fluctuations in different regional power supplies. The voltage adaptation range is wide, with no flicker during startup, ensuring the stable operation of rural road street lights for 24 hours.
3. Strong Environmental Tolerance: The lamp body has IP66 protection and a lightning protection level of Class II. It can work normally in working conditions ranging from -30℃ to 60℃. It can withstand 12-level strong winds and is suitable for complex outdoor environments such as rainy and dusty conditions.
4. Lightweight Structural Design: The single arm is made of high-strength aluminum alloy, reducing the weight by 30% compared to traditional lamp arms. Installation does not require large equipment, reducing the cost and cycle of municipal street light renovation.
▶Product Uses
1. Auxiliary roads of urban expressways: Suitable for lighting on both sides of expressway auxiliary roads. The single-arm extension distance is reasonable, avoiding interference with the main road traffic view. With a high brightness of 130lm/W, it can quickly illuminate the entrance and exit of the auxiliary road, enhancing the safety of vehicle turning.
2. Both sides of municipal bridges: IP66 protection + designed to withstand 12-level typhoons, able to tolerate the high wind speed environment of the bridge. The light coverage includes the pedestrian walkway and non-motorized vehicle lanes on the bridge, ensuring the safety of pedestrians and cyclists during night time.
3. Surrounding areas of bus stops: Adjustable single-arm angle, precisely illuminating the station area. Warm light color temperature enhances the night visibility, facilitating passengers to view the stop signs, while not affecting the view of passing vehicles.
▶Product Operate Guide
1. Foundation inspection: Check the flatness of the prefabricated concrete foundation and the spacing of the bolts to ensure they meet the installation standards;
2. Lamp pole hoisting: Use a crane to vertically lift the lamp pole, align it with the foundation bolts and slowly lower it, then temporarily fix it;
3. Lamp pre-installation: On the ground, fix the lamp on the single arm, connect the control lines, and then install it as a whole to the top of the lamp pole;
4. Tightening and debugging: Tighten the foundation bolts and the lamp screws, power on and test the brightness and dimming function, and confirm stability.
